Product ID:237BHR36, DEVGRIP 237HR 595A36076 DARK GRAY
MSDS Date:05/13/1988
FSC:5610
NIIN:00N028336
MSDS Number: BMSHK

DEVOE COATINGS CO

4000 DUPONT CIRCLE
LOUISVILLE, KY 40207
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 502-897-9861

Cage: 1HK86

DEVOE COATINGS CO

7600 LOUISVILLE, KY 40207-4802 US

Telephone: 502-897-9861

Cage: 1HK86

BUILD-UP OF VAPS BY MAINTAINING CONT FLOW OF

RTECS: 9999999ZZ

STORE LRG QTYS IN BUILDINGS TO COMPLY W/OSHA

RTECS: 9999999ZZ

CONT TO BOTTLES/OTHER UNLBLD CNTNRS. DO NOT REUSE

RTECS: 9999999ZZ

THEN MIX OF BASE & CONVERTER PORTIONS WILL HAVE HAZ

RTECS: 9999999ZZ

PROD CONT CHEM KNOWN TO STATE OF CALIFORNIA TO

RTECS: 9999999ZZ

CHEM/MECH FILTER DESIGNED TO REMOVE COMBINATION

RTECS: 9999999ZZ

WEAR NIOSH/MSHA APPRVD AIR SUPP RESP/USE HOODS. USE

RTECS: 9999999ZZ

BRAZING AND SANDING MATERIAL COATED WITH THIS

RTECS: 9999999ZZ

STDS IN MIX,APPLIC & CURING AREAS & TO REMOVE SANDING

RTECS: 9999999ZZ

& FLAME CUTTING ON SURFS COATED W/PROD. VAPS MAY

RTECS: 9999999ZZ

SOLVENT VAPORS FROM LOWER LEVELS OF WORK AREA.

RTECS: 9999999ZZ

NON-SPARKING TOOLS. STORE IN CLOSED CONTAINER

RTECS: 9999999ZZ

EPOXY RESIN

Fraction By Weight: 10%

(ORAL,RAT) >24000

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICA (TYPE NOT SPECIFIED)

Fraction By Weight: 20%

OSHA PEL 20 MPPCF (MFR)

ACGIH TLV: 5 MG/M3 (MFR)

SILICA GEL; (FUMED SILICA)

CAS: 63231-67-4

RTECS: VV7340000

Fraction By Weight: <5%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3 TDUST

AGGREGATE

Fraction By Weight: 40%

SLAG

Fraction By Weight: 5%

5.9.

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

(ORAL,RAT) >5 GM/KG.

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

(ORAL,RAT)>5 GM/KG.

CAS: 64742-95-6

Fraction By Weight: <5%

OSHA PEL 100 PPM

MAY IGNIT. DURING EMER CNDTNS OVEREXP TO DECOMP

RTECS: 9999999ZZ

APPARENT. OBTAIN MEDICAL ATTENTION.

RTECS: 9999999ZZ

CONSULT PHYS IMMED. DO NOT INDUCE

RTECS: 9999999ZZ

INTENTIONAL MISUSE BY

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENTS 2, 7, 8 & 9.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INHAL:IRRIT OF RESP TRACT;
HDCH, NAUS, DIZZ, WEAK & FATIGUE. EXTREME EXPOS CAN RSLT IN UNCON &
EVEN RESP ARREST. SKIN/EYE: CAUSES EYE & SKIN IRRIT. MAY BE HARMFUL
IF ABSORB THRU SKIN. INGEST: CAN CAUSE STOMACH &/OR INTESTINAL
IRRIT, NAUS, VOMIT & DIARR. (CHRONIC) REPORTS HAVE ASSOCIATED RPTD
& (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA: GROUP 2A (IARC); GROUP 2 NTP.
Effects of Overexposure:HLTH HAZ: PRLNGD OCCUP OVEREXP TO SOLV W/PERM
BRAIN & NERV SYS DMG. PROLONGED OR REPEATED BRTHG OF SPRAY MIST
AND/OR SANDING DUST OVER A PERIOD OF YEARS MAY CAUSE DUST DISEASE
OF LUNGS.
Medical Cond Aggravated by Exposure:NONE, WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.

First Aid:INHAL: IF YOU EXPERIENCE DFCLTY IN BRTHG, LEAVE AREA TO
OBTAIN FRESH AIR. IF CONT DFCLTY IS EXPERIENCED, SUMMON MED
ASSISTANCE IMMED. IF BRTHG CEASES, RESTORE USING APPRVD CPR
TECHNIQUES & SUMMON MED HELP IMMED. EYE: FLUSH IMMED W/LRG AMTSOF
H*2O FOR AT LEAST 15 MIN. GET MED ASSISTANCE. SKIN: WASH AFFECTED
AREAS W/SOAP & H*2O. REMOVE SOILED CLTHG. GET MED ASSISTANCE IF
IRRIT PERSISTS. (ING 12)

Flash Point Method:SCC
Flash Point:85.0F,29.4C
Lower Limits:1%
Extinguishing Media:USE CO*2 DRY CHEMICAL, FOAM, OR OTHER NFPA APPROVED
METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.SUMMON PROFESSIONAL FIREFIGHTERS. H*2O SPRAY MAY BE INEFT. IF
H*2O USED, FOG NOZ PREFERABLE. IF (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD.ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & FLAME. VAPS MAY CAUSE FLASH FIRE. VAPS
MAY IGNITE EXPLO. VAPS MAY SPREAD LONG (SUPP DATA)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT
SURFS, & ELEC, STATIC/FRICTIONAL SPARKS). PVNT BRTHG OF VAPS. VENT
AREA. BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZ CAUTN INFORM IN
OTHER SECTIONS ON MSDS . CONT SPILLED MATL & REMOVE W/INERT ABSORB
&(ING 14)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND
FLAMES. DO NOT SMOKE.
Other Precautions:EXTING ALL PILOT LIGHTS & TURN OFF ALL SOURCES OF
IGNIT INCL HEATERS, FANS & OTHER NON-EXPLO-PROOF ELEC EQUIP, DURING
USE & UNTIL ALL VAPS ARE GONE. VAPS MAY IGNITE EXPLO. VAPS MAY
SPREAD LONG DISTANC ES & BEYOND CLSD DOORS. PVNT (ING 15)

Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAS,&
DURING SANDING/GRINDING OPER,USE NIOSH/MSHA APPRVD MECH FILTER RESP
TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY & SANDING DUST.
WHEN USED IN RESTRICTED V ENT AREAS,WEAR NIOSH/MSHA APPRVD(ING 20)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAM CONC BELOW CURRENT APPLIC SAFETY & HLTH (ING 23)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SOLVENT IMPERMEABLE CLOTHING AND BOOTS TO
PREVENT SKIN CONTACT ARE RECOMMENDED.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: EXPOS TO FIRE/EXTREME HEAT, H*2O SHD BE USED TO COOL
CLSD CNTNRS & PVNT PRESS BUILD UP/POSS AUTO-IGNIT. EXPLO HAZ:
DISTANCES & BEYOND CLSD DOORS. DUE TO PRESS BUILD-UP, CLSD CNTNRS
EX POS TO EXTREME HEAT MAY EXPLO. NEVER USE WELDING/CUTTING TORCH
ON/NEAR CNTNR (EVEN EMPTY) AS PROD/ITS RESIDUE (ING 10)

HCC:F4
Boiling Pt:B.P. Text:240F,116C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.98
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:32.68

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOXIC FUMES WHEN HEATED TO
DECOMPOSITION. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.